Morbidelli Author 600kl


Results 1 to 4 of 4

Thread: Morbidelli Author 600kl

  1. #1
    Member Magnetix's Avatar
    Join Date
    Dec 2020
    Posts
    5
    Downloads
    1
    Uploads
    0

    Default Morbidelli Author 600kl

    Hello everyone. Tell me, who knows how to rotate a circular saw 90 degrees? Now it is on the Y axis, but it should be on the X axis. Thanks.



  2. #2
    Member Magnetix's Avatar
    Join Date
    Dec 2020
    Posts
    5
    Downloads
    1
    Uploads
    0

    Default Re: Morbidelli Author 600kl

    When starting the program, the saw turns approximately 45 degrees and stops. PLC80 = TOOL OUT OF POSITION



  3. #3
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35458
    Downloads
    1
    Uploads
    0

    Default Re: Morbidelli Author 600kl

    Is there a proximity sensor detecting it's position? If so, it may be bad or broken.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Member coc9's Avatar
    Join Date
    Jul 2018
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: Morbidelli Author 600kl

    Hello, it may be a faulty limit switch or a cable connecting to the limit switch.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Morbidelli Author 600kl

Morbidelli Author 600kl

Morbidelli Author 600kl