Need Help! Xilog plus newbie


Results 1 to 1 of 1

Thread: Xilog plus newbie

  1. #1
    Member Nasnss's Avatar
    Join Date
    Nov 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Xilog plus newbie

    Hello,
    I recently purchased a 2007 scmi bridge 5 second hand. I have been slowly getting the machine to do what I ask it to. The machine had old programs (spoilboard , old jobs ect) loaded on it from the previous owner. I have had trouble getting these to load or do anything in the machine. So I decided to try do a simple program in xilog plus. However when I try to create a new project i am shown a full screen header page. After filling in all the available boxes there is an error code stating that R needs to be a positive value. There is no R in the screen that I see. After doing somemore looking on youtube i saw a video of a step by step set up of a job. They are getting a box/window that pops up. I do not get this. Any ideas?
    Neil

    Similar Threads:


  2. #2
    CidR's Avatar
    Join Date
    Mar 2020
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Xilog plus newbie

    Hello Neil,

    the R is a parameter of the header of all pgm files that are used in the xilog software. It is the number of repetitions of that program.

    Therefore they must a positive. See attach image.

    Yours Truly,

    Cid Rodrigues



  3. #3
    Registered
    Join Date
    Aug 2011
    Location
    Portugal
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Xilog plus newbie

    Quote Originally Posted by Nasnss View Post
    Hello,
    I recently purchased a 2007 scmi bridge 5 second hand. I have been slowly getting the machine to do what I ask it to. The machine had old programs (spoilboard , old jobs ect) loaded on it from the previous owner. I have had trouble getting these to load or do anything in the machine. So I decided to try do a simple program in xilog plus. However when I try to create a new project i am shown a full screen header page. After filling in all the available boxes there is an error code stating that R needs to be a positive value. There is no R in the screen that I see. After doing somemore looking on youtube i saw a video of a step by step set up of a job. They are getting a box/window that pops up. I do not get this. Any ideas?
    Neil
    Hi Neil, As CidR said, R has to be an integer > 0, at least 1, it is very helpfull with the repetitions of the program.
    Best Regards,
    Cristiano



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Xilog plus newbie

Xilog plus newbie

Xilog plus newbie