Need Help! Xilog plus error


Results 1 to 3 of 3

Thread: Xilog plus error

  1. #1
    Registered
    Join Date
    Jun 2016
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Xilog plus error

    Hello,
    Machine model TECH99L ESA K6
    s/n AL104042



    1. I run PanelMac (Xilog Plus) on the PC, when the programm boots up,I get this error code
    Except [24,6]- NCI(1-6) : Reading an invalid item
    (see pic_1)
    2. Clik <OK> on Messages error window and get Automatic mode, and get Alarm CN1012 : ? ( see pic_2)
    3. Click on menu item Calibration, machine run and after finish I get pic_3
    4. Click on menu item MDI , I get this error code
    Except [25,5]-NCI(14-6) : Communication failure with CNC !
    (see pic_4)
    Can You help me ? Any suggestion ?
    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Xilog plus error-pic_3-jpg   Xilog plus error-pic_2-jpg   Xilog plus error-pic_1-jpg   Xilog plus error-pic_4-jpg  



  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Xilog plus error

    Call SCM?

    I've never seen that particular error.


    Once in a while I get the "lost connection", and restarting the software always reconnects.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member ROHAILAFZAL's Avatar
    Join Date
    Oct 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Xilog plus error

    I HAVE SCM TECH Z2 serial number is AA1/017045
    I get this error code Except [25,5]-NCI(14-6) : Communication failure with CNC ! ON XILOG SOMEONE HELP ME



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Xilog plus error

Xilog plus error