Kitamura My1 Fanuc 3M drilling Centre

[Mahesh Maruvada]

Hi,
My machine is periodically coming up with Z axis Servo Alarm 35. Sometimes this alarm even comes up when the axis is not moving htough teh mahcine is powered up.
Also the alarm is coming up when the actual cutting is in the Y axis.
I will appreciate any assistance on this.
Also if some one could actually check this alarm description in the Fanuc 3M maintenance manual we have misplaced this.
thanks.

Similar Threads:

• Finding the centre of thin brass rod (drilling holes in 0.093" brass rod)
• Need Help!- fanuc 0-i MD milling centre
• Kitamura MC-2 Fanuc 6Mb -- M20 THRU M23
• Kitamura My Centre 2c

[RayinNH]

servo alarm # 35 reads "Drift in the Z axis is exessive. (Exceeds 500 VELO)"

I have never seen that one before.

[Mahesh Maruvada]

Hi Ray ,
Thanks a lot. It really helps. Apparently, its a component fault on the mother board and the engineer is working on it now. I will keep you posted when it is completed.

Cheeers
Mahesh