Help with BiesseWorks (skipper 130)

[jvalencia]

Hello everyone, we are making lots of furniture with this machine but something that we can't do are horizontal drills near the clamps.

Look at this schematic:



The clamps are the red squares, and BiesseWorks will throw an error for the 2 top horizontal drills (error without explanation), near the clamps. Only moving them to more than 95mm from the clamps will clear the error.


I know this machine can do those holes, as seen in the brochure (pdf):



So I'm totally lost why BiesseWorks won't allow me to do that

Any help would be appreciated, thanks.

Similar Threads:

• skipper 100 safety mats
• Need Help!- biesse skipper 100

[Antzc]

Hello everyone, we are making lots of furniture with this machine but something that we can't do are horizontal drills near the clamps.

Look at this schematic:





The clamps are the red squares, and BiesseWorks will throw an error for the 2 top horizontal drills (error without explanation), near the clamps. Only moving them to more than 95mm from the clamps will clear the error.


I know this machine can do those holes, as seen in the brochure (pdf):





So I'm totally lost why BiesseWorks won't allow me to do that

Any help would be appreciated, thanks.

Hi, I know this is probably a little late but you need a piece position on the program. Any issues feel free to ask.

Thanks
Ant