Hello everyone, we are making lots of furniture with this machine but something that we can't do are horizontal drills near the clamps.
Look at this schematic:
The clamps are the red squares, and BiesseWorks will throw an error for the 2 top horizontal drills (error without explanation), near the clamps. Only moving them to more than 95mm from the clamps will clear the error.
I know this machine can do those holes, as seen in the brochure (pdf):
So I'm totally lost why BiesseWorks won't allow me to do that
Any help would be appreciated, thanks.
Similar Threads:
- skipper 100 safety mats
- Need Help!- biesse skipper 100
Hi, I know this is probably a little late but you need a piece position on the program. Any issues feel free to ask.Hello everyone, we are making lots of furniture with this machine but something that we can't do are horizontal drills near the clamps.
Look at this schematic:
The clamps are the red squares, and BiesseWorks will throw an error for the 2 top horizontal drills (error without explanation), near the clamps. Only moving them to more than 95mm from the clamps will clear the error.
I know this machine can do those holes, as seen in the brochure (pdf):
So I'm totally lost why BiesseWorks won't allow me to do that
Any help would be appreciated, thanks.
Thanks
Ant