Problem Busellato jet 4002


Results 1 to 2 of 2

Thread: Busellato jet 4002

  1. #1
    Registered
    Join Date
    Sep 2016
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Busellato jet 4002

    Hello
    I have recently acquired a busellato jet 4002 with a computer that doesnt seems to work. I have installed a new computer and got a recovery cd but it seems i need a fresh installation. Does anyone have a Genesis 2.2 software installation cd ? For some reason the software is showing spindle error and i cant figure out. It performed a set point once and that it. Any help would be appriciated. Thank you

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2015
    Location
    Canada
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Busellato jet 4002

    Hey is this still a problem?

    Ran into a similar situation, the spindle is controlled over com port, new PC might mean com port is sent wrong in communication driver, are you fimilar how to change this?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Busellato jet 4002

Busellato jet 4002