Need Help! Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus


Page 1 of 2 12 LastLast
Results 1 to 12 of 13

Thread: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

  1. #1
    Registered
    Join Date
    Jan 2017
    Location
    Brazil
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    The Old Computer that uses Windows 98 died. then I start to migrate to Windows XP.

    First is the Xilog3 I have the backup of complete folders
    Seccond the Kvara I have the backup of complete folders

    Then I start a clean setup of Windows XP.
    I did the configuration to make Windows XP to behave as monoprocessor OS
    Install the Drivers


    Everything OK til now...
    I upload the files to


    When I try to Open the BaseMenu this Message Appears.

    Attach 1

    And Xilog as it shows on Attach 2

    Need Help, I try everything... Serial Ports are Working Flawlessly as Serial Cable has been tested with sucess...

    I apreciate any help....

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-base-menu-png   Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-xilog-error-png  


  2. #2
    Service SCM BR
    Guest

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Verify the COM on the PC and CN.
    Verify the file Xilog3.ini if the settings is COM correct and it is working correctly.



  3. #3
    Registered
    Join Date
    Jan 2017
    Location
    Brazil
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    I have already check it for many times... it has the same configuration as it was in the old computer.

    Attached Thumbnails Attached Thumbnails Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-img-20170117-wa0121-jpg   Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-img-20170117-wa0120-jpg   Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-img-20170116-wa0023-jpg   Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-xilogini-png  



  4. #4
    Service SCM BR
    Guest

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Try modify xilog3.ini.
    Put ; in the third line and delete ; of the second line.
    Because I remember the baud rate correct is 9600



  5. #5
    Registered
    Join Date
    Jan 2017
    Location
    Brazil
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    I think I found the error, there's a file, params.cfg, I couldn`t copy that file, it say that file is corrupt...
    that's the only thing is different between one folder to other...

    Last edited by betancour; 01-18-2017 at 08:33 PM.


  6. #6
    Registered
    Join Date
    Jan 2015
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Try to set to only one cpu core In msconfig( google it )
    Other thing could be com cable. Pin 2 and 3 must be switched in win xp.



  7. #7
    Registered
    Join Date
    Jan 2017
    Location
    Brazil
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Quote Originally Posted by dmitry83 View Post
    Try to set to only one cpu core In msconfig( google it )
    Other thing could be com cable. Pin 2 and 3 must be switched in win xp.
    Thanks for answering my comment gently....

    One more question
    This Pin setup is made by software or Phisical?

    Regards



  8. #8
    Registered
    Join Date
    Jan 2015
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by betancour View Post
    Thanks for answering my comment gently....

    One more question
    This Pin setup is made by software or Phisical?

    Regards
    Phisical. On com cable from plc to pc are 3 wire. 2,3 and 5



  9. #9
    Registered
    Join Date
    Jan 2017
    Location
    Brazil
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Quote Originally Posted by dmitry83 View Post
    Phisical. On com cable from plc to pc are 3 wire. 2,3 and 5
    Pins are swiched now but still have the same error



  10. #10
    Registered
    Join Date
    Jan 2017
    Location
    Brazil
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    I`ve made everything that people recommend to do

    But still I can not make it work in Windows XP, I wonder if it`s possible to make a Win9X VM, and make it work with standart Virtualized Serial PORT.
    I apreciate the help

    Kindest Regards



  11. #11
    Registered
    Join Date
    Jul 2014
    Location
    Russian Federation
    Posts
    16
    Downloads
    8
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Open the KVARA.ini file in the KVARA folder



  12. #12
    *Registered User* lamhon's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

    Quote Originally Posted by piratman1 View Post
    Open the KVARA.ini file in the KVARA folder
    hi, help me
    The machine Scm tech 80 show Error 4118 , communication failure with CNC.

    Thanks
    lamhon

    Attached Thumbnails Attached Thumbnails Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-11-jpg   Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus-22-jpg  


Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus

Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus