Hi there,
you dont need a RS232
Better is a simple Network Card.
Got some an think its not hard to install.
If it sounds Interesting.....send me a Message
Hello,
Does anyone know how to use a DNC link (RS232) with an XNC controller? I would like to transfer my programs over serial connection instead of using floppies...
In the XNC 1.2 manual there is a small paragraph over remote connection (7.12) but it is not explained how to enable the connection and the communication settings.
Could anybody help me?
Thanks
Similar Threads:
Hi there,
you dont need a RS232
Better is a simple Network Card.
Got some an think its not hard to install.
If it sounds Interesting.....send me a Message
Hello everyone
I have biesse rover 22
Dose anyone knows how can i let the spindle rotate in manual mode or movement data input mod
I can move the AXIS but the spindle no speed at all
Like Daniel I'm trying to network our Rover 23. It already has a network card in it and the last owners had theirs networked. What I'm not seeing is in the XNC software how to map or "hook up" a shared folder or any other way of connecting to a computer. Anyone know where to find it?