Problem Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed


Results 1 to 2 of 2

Thread: Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

  1. #1
    Registered
    Join Date
    Feb 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

    I'm a IT guy helping out my brother in-law. He has a Weeke BP120 (circa 1999) that connected to a PC running Win98, Weeke 2000-IPC, and WoodWOP. The PC hard drive crapped out. I tried to retrieve data from it, but it was toast. I got him another hard drive and installed XP and WoodWOP. Weeke 2000-IPC floppies are missing (only have disk 1 of 2, ahh!). Need to get the Weeke 2000-IPC software, can anyone help?

    Also doing research it looks like Week 2000-IPC doesn't run on XP. Has anyone tried running it on XP or WIN7? It's my understanding that the software is a DOS based program/driver between the PC and the BP120. Could I just run it in WIN7 in compatibility mode.

    Any help would be appreciated, as my brother in-law is a small business owner. I have the manual to the BP-120, if any BP120 owners would like a copy, I could PDF it.

    Thanks
    GW

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2013
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

    Hello,
    i have same problem and i want to know if you get the chance to exchange from 98 to XP






    Quote Originally Posted by glenn_wood View Post
    I'm a IT guy helping out my brother in-law. He has a Weeke BP120 (circa 1999) that connected to a PC running Win98, Weeke 2000-IPC, and WoodWOP. The PC hard drive crapped out. I tried to retrieve data from it, but it was toast. I got him another hard drive and installed XP and WoodWOP. Weeke 2000-IPC floppies are missing (only have disk 1 of 2, ahh!). Need to get the Weeke 2000-IPC software, can anyone help?

    Also doing research it looks like Week 2000-IPC doesn't run on XP. Has anyone tried running it on XP or WIN7? It's my understanding that the software is a DOS based program/driver between the PC and the BP120. Could I just run it in WIN7 in compatibility mode.

    Any help would be appreciated, as my brother in-law is a small business owner. I have the manual to the BP-120, if any BP120 owners would like a copy, I could PDF it.

    Thanks
    GW




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed