Need Help! Biesse Rover A3 - PLC error


Results 1 to 6 of 6

Thread: Biesse Rover A3 - PLC error

  1. #1
    Registered
    Join Date
    Mar 2013
    Location
    Croatia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Biesse Rover A3 - PLC error

    Hello,

    I have two strange errors on my Rover A3 when I start up machine.
    It says:

    PLC 375 > Time-out during communication with a device ax.0
    PLC 372 > HALT

    http://www.abload.de/img/errordlko6.jpg

    After that, I can't power on Rover, I should get signal (RED light ON) but nothing.

    What kind of problem is this?
    Is something serious or not?
    How to get rid of that error?

    Thnx a lot.

    Similar Threads:


  2. #2
    Registered EXLASer's Avatar
    Join Date
    Nov 2009
    Location
    China
    Posts
    314
    Downloads
    0
    Uploads
    0

    Default

    Hi ,
    Time-out during communication often occurs whenever the driver isn't installed well ,so no communication with PC and Machine . You may have a check ~ Well we are not familiar with this controller system . Have you consult with the manufacture and get help from the technician .

    Best regards,
    XYZ Machinery



  3. #3
    Member
    Join Date
    Feb 2009
    Location
    Malaysia
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default

    you have a problem with the PLC its in HALT. try to send your log file to Biesse, they can tell you where is the fault



  4. #4
    Registered
    Join Date
    Feb 2018
    Location
    Iraq
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover A3 - PLC error

    Hi
    i have the same problem and i get just like your errors did you solve that?



  5. #5
    Member Bsetek2010's Avatar
    Join Date
    Apr 2019
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    Check the connections on the back of the PC.
    This is generally a problem with the connection between the PC and the machine.
    Could also be the network card in the PC.

    Quote Originally Posted by v3rbatim99 View Post
    Hello,

    I have two strange errors on my Rover A3 when I start up machine.
    It says:

    PLC 375 > Time-out during communication with a device ax.0
    PLC 372 > HALT

    http://www.abload.de/img/errordlko6.jpg

    After that, I can't power on Rover, I should get signal (RED light ON) but nothing.

    What kind of problem is this?
    Is something serious or not?
    How to get rid of that error?

    Thnx a lot.




  6. #6
    Member
    Join Date
    Jul 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover A3 - PLC error

    Hello,
    I am experiencing the exact problem as v3rbatim99 with my Biesse Rover A3.
    The machine was working fine, but after a power supply unit replacement on the PC, the PC lost communication with the machine and I am getting the error:
    PLC 375 > Time-out during communication with a device ax.0
    PLC 372 > HALT
    There seem to be no problem with the opertation of the PC and everything seems connected OK.
    I would greatly appreciate it if you kindly give me some feedback on how to overcome the problem.
    Thanks in advance.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Biesse Rover A3 - PLC error

Biesse Rover A3 - PLC error