And a program
It’s just a test!
Hello
I installed a demo version of cimco editor 5.6 to exercise as long as I stay home.
But when I try to add a program to blackplot, the following error occurs:
Machine not defined
Here is a screenshot of the settings:
Could you show the error message, too?
Hello n2lAnd a program
It’s just a test!
It’s a Fanuc program.
Try this one.
Regards, InTex
Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
Hello n2l
It’s a Fanuc program.
Try this one.
Regards, InTex
Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
Hello n2l
Did you define the machine in DNC settings?
If you didn’t, then you should do it.
One can see a dropdown menu at you screenshot – there’s nothing chosen there – check if you may choose a machine there and try again.
If it doesn’t help, look in the settings under spec. file types -> CNC-machine/Backplot and check whether everything is correct there.
Gruß / Regards
CNCFanatiker
AdminCrew
Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.
If we always this act what we are able to do, then we always remain what we are.
HelloHello n2l
Did you define the machine in DNC settings?
If you didn’t, then you should do it.
One can see a dropdown menu at you screenshot – there’s nothing chosen there – check if you may choose a machine there and try again.
If it doesn’t help, look in the settings under spec. file types -> CNC-machine/Backplot and check whether everything is correct there.
The icon menu belongs to DNC Max and has no bearing on simulation. Programs are simulated with standard installation without program adjustment. Check your settings under Backplot.
Greetings
Karsten
<!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->"Menschen mit einer neuen Idee gelten so lange als Spinner, bis sich die Sache durchgesetzt hat."<!--sizec--></span><!--/sizec--> <!--sizeo:1--><span style="font-size:8pt;line-height:100%"><!--/sizeo-->Mark Twain<!--sizec--></span><!--/sizec--><br /><br /><br />CAD/CAM<br /><br />Programmierung - Prozessoptimierung - Automatisierung <br /><br />www.vcc-production.eu
So guys
The problem is solved. The 5.6 version was the reason. Everything worked at first go with the version 5.5.
But thanks a lot for your help!
It also works with the 5.6So guys
The problem is solved. The 5.6 version was the reason. Everything worked at first go with the version 5.5.
But thanks a lot for your help!
Greetings
Karsten
<!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->"Menschen mit einer neuen Idee gelten so lange als Spinner, bis sich die Sache durchgesetzt hat."<!--sizec--></span><!--/sizec--> <!--sizeo:1--><span style="font-size:8pt;line-height:100%"><!--/sizeo-->Mark Twain<!--sizec--></span><!--/sizec--><br /><br /><br />CAD/CAM<br /><br />Programmierung - Prozessoptimierung - Automatisierung <br /><br />www.vcc-production.eu