Flutes for cutting aluminum on workbee

Results 1 to 3 of 3

Thread: Flutes for cutting aluminum on workbee

  1. #1

    Join Date
    Aug 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Flutes for cutting aluminum on workbee

    Hi All,

    I've recently built a workbee and would like to try milling 1/4" aluminum plate. Can anyone guide me to what kind of flute I should buy to accomplish this? Also, apologies if this is a newbie question, I am very new to all of this.

    - Billy



  2. #2
    Member
    Join Date
    Apr 2013
    Location
    USA
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: Flutes for cutting aluminum on workbee

    single o flute router for 6063 or 6061 aluminum
    negative rake single flute for 3000 or 5000 series $44 on amazon



  3. #3
    Member coherent's Avatar
    Join Date
    Apr 2003
    Location
    Arizona, USA
    Posts
    540
    Downloads
    2
    Uploads
    0

    Default Re: Flutes for cutting aluminum on workbee

    2 and 3 flute bit will work fine for aluminum. 2 is my preference and I'd stay away from 4 flute bits. Just as important is the proper helix. Specialized helix angles for aluminum are typically either 35°, 40°, or 45°. The goal with less flutes is their effect on cutting speed/temps. The higher helix bits clear chips better and improve material removal.. The exact "best" bit depends on the aluminum composition/type, thickness and your machines capabilities.. and of course the finish you require.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Flutes for cutting aluminum on workbee

Flutes for cutting aluminum on workbee