Hello
I bought a CNC turning machine Syil C6 with CNC Super Box and the Mach3 controller software.
Does anybody happen to know the correct PIN settings for the output signal for X and Z axes and also PIN settings for the spindle speed indication?
Regards, Sonnee
Hello
Motor output
X-axis ---- Step Pin# =3 Dir Pin# =2
Z-axis ---- Step Pin# =5 Dir Pin# =4
Output signals
Output1 ---- Port# =1 Pin number =14
Output2 ---- Port# =1 Pin number =17
Spindle relay settings
Clockwise rotation (M3) – output# =1
Counter clockwise rotation (M4) – output# =2
These are my settings shown in a test of 2-axial controlling card.
Regards, InTex