- Partial Arc to Arc
-
Member
Partial Arc to Arc
I'm programming a .75R into a .01R on a .1875dia. Doing the math by hand. The partial arcs always give me fits and doing an arc to arc is something I haven't done yet. Any help is appreciated
Similar Threads:
-
-
Member
Re: Partial Arc to Arc
Below is a program example of a .02 rad into a 20° angle. should be able to use the same concept for your double radius. This then goes back in Z and does another 20° angle, because I am sure someone will ask G9 is high accuracy machining
G1X-.05F.002
X.143, R.02
X.190,A20.F.001
G9Z.653F.0012(FIRSTZSHOULDER)
X.250,A45.F.001
- Partial Arc to Arc
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules