Alarms



Results 1 to 3 of 3

Thread: Alarms

  1. #1
    Member New2CNC4me's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Alarms

    Greetings Everyone,

    I'm new to this, so bear with me. I am a beginning machinist working on a Citizen L20E and wanted to find out more about some alarms that keep happening. All of these have happened within the last month to currently. Nobody that I work with seems to know.

    Here is a list of them;

    spindle cond check time exceed 1102 $1

    axis error alarms

    stroke alarm (what is it?)

    emergency stop SRV

    Over load 1 0050 A7 $3

    Auto operation pause signal ON 0204 $1 & $2.


    Any information on them would be appreciated Thanks so much

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    304
    Downloads
    0
    Uploads
    0

    Default Re: Alarms

    spindle cond check time exceed 1102 $1 === You are trying to close the collet while spinning too fast. The machine tried but it took too long = Alarm

    axis error alarms === What axis'?

    stroke alarm (what is it?) === Overtravels should say what axis' did this.

    emergency stop SRV === Could be many things. You never get only one message and you need the others to decipher what happened. Take a picture and send to MCC engineer for help.

    Over load 1 0050 A7 $3 === A7 is the CAV barloader pusher. That is an axis in the Cincom machines. Overload usually means it was pushing too hard or was being pushed back by the spindle.

    Auto operation pause signal ON 0204 $1 & $2. === Not an alarm, just a caution message.

    I'm new to this, so bear with me. I am a beginning machinist working on a Citizen L20E and wanted to find out more about some alarms that keep happening. All of these have happened within the last month to currently. Nobody that I work with seems to know.

    Here is a list of them;

    spindle cond check time exceed 1102 $1

    axis error alarms

    stroke alarm (what is it?)

    emergency stop SRV

    Over load 1 0050 A7 $3

    Auto operation pause signal ON 0204 $1 & $2.


    Any information on them would be appreciated Thanks so much[/QUOTE]



  3. #3
    Member New2CNC4me's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Alarms

    Is the MCC Engineer on this site? Where do I send the pictures to?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Alarms

Alarms