Alarm Z09 remote io m32 help



Results 1 to 3 of 3

Thread: Alarm Z09 remote io m32 help

  1. #1
    Member Drisscn's Avatar
    Join Date
    Jul 2019
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Alarm Z09 remote io m32 help

    hello i have my citizen m32 2001 machine when i launch the program after sometimes an alarm which triggers on console z09 remote io i restart the machine i start after some time alarm again i don't know how to fix this problem

    Similar Threads:


  2. #2

    Default Re: Alarm Z09 remote io m32 help

    Remote I/O alarms are from the HR371 card
    On this machine you will have 2 in the NC unit and depending what is on your machine you will have some on the IF card in the electrical cabinet check that these are all plugged well in and not loose
    If the I/O card is on a swing out door check the conection CNC8 on this card best way with machine not in cycle wobble this plug to see if you get the alarm



  3. #3
    Member Drisscn's Avatar
    Join Date
    Jul 2019
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default

    Thank you for your answer really I have 2 card on console and 3 on the electrical cabinet Hr371 I checked the cards are well connected how I will know the card which defective



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Alarm Z09 remote io m32  help

Alarm Z09 remote io m32  help