- Alarm Z09 remote io m32 help
-
Member
Alarm Z09 remote io m32 help
hello i have my citizen m32 2001 machine when i launch the program after sometimes an alarm which triggers on console z09 remote io i restart the machine i start after some time alarm again i don't know how to fix this problem
Similar Threads:
-
-
Member
Re: Alarm Z09 remote io m32 help
Remote I/O alarms are from the HR371 card
On this machine you will have 2 in the NC unit and depending what is on your machine you will have some on the IF card in the electrical cabinet check that these are all plugged well in and not loose
If the I/O card is on a swing out door check the conection CNC8 on this card best way with machine not in cycle wobble this plug to see if you get the alarm
-
Member
Thank you for your answer really I have 2 card on console and 3 on the electrical cabinet Hr371 I checked the cards are well connected how I will know the card which defective
- Alarm Z09 remote io m32 help
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules