- Drill tool holding
-
Member
Drill tool holding
Recently purchased a '95 Citizen E 25J . I had never operated a swiss lathe before so bear that in mind. Have it running fine and dandy.
However i am curious what most people are using to chuck drills into the tool holders with on these machines.
I had to make some custom sized sleeves to mount the drills into the bore of the tool holders. Its working fine but this is not a good way to operate long term. Especially when i need to make quick setups in the future. On all my other CNC lathes i just buy ER32 collet holders with a straight shank and mount them into the tool holder bores. However there is not enough room on this Swiss machine to add an ER collet chuck and still have a drill longer than maybe 1/2" mounted in it.
Similar Threads:
-
-
Member
Re: Drill tool holding
most of the holders that i use are er16 collet sleeves mostly from genswiss
-
Member
Re: Drill tool holding
I do have some ER16 chucks with straight shank. Still lose almost 1" of Z from the collet nut sticking out but considering the small parts that probably will be ok for most jobs.
- Drill tool holding
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules