Cincom Citizen L20 swiss cnc inquiry; decent?

Results 1 to 4 of 4

Thread: Cincom Citizen L20 swiss cnc inquiry; decent?

  1. #1
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Cincom Citizen L20 swiss cnc inquiry; decent?

    A friend and myself are looking at an opportunity to acquire a 3000sqfy shop and a pair of Cincom citizen L20 swiss cnc along with a small customer base. If we move ahead we intend to move our two businesses together and blend a 3 in 1 since we manufacture many similar sized parts. My question is does anyone have experience with these and if there is something we should look at when we go inspect this coming Saturday. Both machines are currently operable and run in a part time environment. They would be very useful for our own products and the irony is they were already manufacturing something similar so it seems like a good opportunity to take on together. My main concern is I know what to inspect besides spindle runout and obvious things like that. Both machines have feeders and swarf conveyers. A couple photos attached. Both are essentially same.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Cincom Citizen L20 swiss cnc inquiry; decent?-dbe67e5b-4e74-440d-9e9a-a7bd0e27271c-jpg  


  2. #2
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default

    Correction I misunderstood other machine is a 16 mil star not for this post. So it’s one citizen. Looks like a yama seiki sw-32 (not operating) also included.




    Quote Originally Posted by Uguessedit View Post
    A friend and myself are looking at an opportunity to acquire a 3000sqfy shop and a pair of Cincom citizen L20 swiss cnc along with a small customer base. If we move ahead we intend to move our two businesses together and blend a 3 in 1 since we manufacture many similar sized parts. My question is does anyone have experience with these and if there is something we should look at when we go inspect this coming Saturday. Both machines are currently operable and run in a part time environment. They would be very useful for our own products and the irony is they were already manufacturing something similar so it seems like a good opportunity to take on together. My main concern is I know what to inspect besides spindle runout and obvious things like that. Both machines have feeders and swarf conveyers. A couple photos attached. Both are essentially same.




  3. #3
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Uguessedit View Post
    Correction I misunderstood other machine is a 16 mil star not for this post. So it’s one citizen. Looks like a yama seiki sw-32 (not operating) also included.
    Photo of citizen control. Guessing it’s 80’s? Not really familiar with these Swiss. Fortunately it comes with a full time hire or training if we choose to move forward.

    Attached Thumbnails Attached Thumbnails Cincom Citizen L20 swiss cnc inquiry; decent?-ad605520-e5d0-4094-a921-5c90f2627764-jpg  


  4. #4
    Member
    Join Date
    Jan 2012
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Cincom Citizen L20 swiss cnc inquiry; decent?

    The Citizen and Star look to be very old machines, so you have to be concerned with part availability when things start breaking down. Suggest to run all slides in rapid and listen for any load noises.
    Yama Seiki does not seem to have adequate service and support in the US



  5. #5
    SwissTeacher's Avatar
    Join Date
    May 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Swiss machines if taken care of can last a long time. Things to look for are bearing wear mainly. Have them turn on the spindles through various RPMs. Listen to them. If you hear anything like a whine or a grinding sound, bearings should be replaced. Also look for signs of crashes. Dented panels, missing paint etc. Ballscrews should be looked at by having the axis moved on its full range of motion



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cincom Citizen L20 swiss cnc inquiry; decent?

Cincom Citizen L20 swiss cnc inquiry; decent?

Cincom Citizen L20 swiss cnc inquiry; decent?