Parameters for Citizen Cincom L16 With Meldas 320 CNC control

[IvCastilla]

Dear Firends,
We just bought a CNC swiss lathe
Citizen 5L16 type 6
Serial No. X7005
Date 1991
Control MITSUBISHI MELDAS 320L
Serial M3429341315
We need the CNC paramaters.
We have a full set of manuals but parameters appears nowhere.
If you have or want to help us, we are willing to pay if necessary.

Thank you,

Ivan Castilla

Similar Threads:

• cincom citizen L20/3M7
• Need Help!- Problem with Mitsubishi Meldas FCA320LC-V Control for Citizen l20/VII Machine
• Need Mitsubishi Meldas 320' parameters for Cincom L16
• Meldas 625m control parameters

[chippy1]

Typically the Mitsubishi system and machine parameters are stored on EEPROM. The Citizen specific parameters and user parameters you will need to get from Citizen. These maybe the PLC related parameters located in the machine parameter pages.

Chippy

[IvCastilla]

Dear Chippy,
The lathe was in storage almost a year before We receive it.
In that time the previous owner do not turn it ON, batteries go down and CNC parameteres are gone.
Citizen does no not have a direct support in Mexico, they have a representative.
We contact them and they contact Citizen at USA and Citizen USA will ask to japan.
Since that long burocratic chain happen, We are trying to get the parameters in this forums.

All help and support is highly appreciated.

Ivan Castilla

[chippy1]

Ivan, search under posts by me. I uploaded parameters for your machine just didn't know how to attach to this thread.

Chippy

[Artifol]

Dear Chippy,

We are looking for C-AXIS PARAMETERS for Citizen Cincom F20 CNC Lathe . If could provide us any help, we will be thankful to you.
My email: sales@artifol-ent.com.

Best regards,

ZUBAIR
ARTIFOL ENTERPRISES
sales@artifol-ent.com

[steelway]

Kindly email me at steel_way@yahoo.com for Parameters of this machine.

[Namnp2007]

Kindly e-mail me at : namnp2007@gmail.com. Thanks

[Namnp2007]

Dear Chippy.
Please kindly sent me the parameter of this machine at: namnp2007@gmail.com. Thanks a lot.

[deep44]

Dear Friend ,

Have you cincom Citizen Manchine l20 ?

So please send me SRAM and Parameter Backup Of Same or any Manual ..!!