hi all
how will the gcode by to go home in ACRAMATIC A2100?
thanks
Similar Threads:
- Need help with g code for fire control pocket on AR15 lower reciver, have G code.
- Program to Convert Mill g code To Laser g code - CMTL
- mach3 crashing with run of code/drilling holes through table with other code
- Newbie- corel.hpgl > sheetcam.tap > pronterface.g-code > slic3r.g.code> ramps 1.4 > H-BOT
- Need Help!- My Milling OKK with fanuc 6M can't recognize G-code & M-code
You can set a HOME position with the Pendant and use the G28 with P variables. RAP will explain this.
I prefer to move the Machine Axes to where I want the Home to be; then select "Current Display" screen.
Record the desired "Machine Position" Coordinates.
You can program a M26 ; This moves the Face of the Spindle to a full Z-Retract position in Machine Coordinates.
Program a G0/G1 G98.1 Xx.xxxx Yy.yyyy Fxxx ;to position the X & Y in Machines Coordinates.
This will NOT be lost at a power fail or unsequenced shutdown; like the HOME position.