Cincinatti Arrow 500 spindle clamp speed


Results 1 to 3 of 3

Thread: Cincinatti Arrow 500 spindle clamp speed

  1. #1
    Member
    Join Date
    Jan 2009
    Location
    UK
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Cincinatti Arrow 500 spindle clamp speed

    Hi all, our 500 has just started to develop the nasty habit of smashing the tools out of the carousel every now & then. Also it does get stuck during tool change and holds at the tool change position with a "drawbar switch clamp not seen" error.
    This is an intermittent fault & it does seem like the drawbar is not moving very quickly at all despite the air pressure being ok.
    Anyone have any idea or can I add a slight delay before & during toolchange as a last resort as I'm running out of cutters!
    TIA...

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    United States
    Posts
    284
    Downloads
    0
    Uploads
    0

    Default Re: Cincinatti Arrow 500 spindle clamp speed

    This machine needs 14 SCFM air at 85-90 PSI with a 1/2" airline and no restrictions or oilers added.
    The Spindle Tool Knockout MUST measure between .7mm and 1mm
    If this is correct then the Unclamp / Clamp / Tool Absent Switches need to be properly adjusted.
    OEM Cincinnati Technical support +1-800-934-0735 (Prompt for Cincinnati & Technical Support). 8am-5pm EST. You will need Machine Serial Number; Model Type such as 'ERO' and Controll Diagram # i.e. 9120xxxxy



  3. #3
    Member
    Join Date
    Jan 2009
    Location
    UK
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Cincinatti Arrow 500 spindle clamp speed

    Thanks gwood, looks like our compressor has a faulty pressure sensor and is sometimes bottoming out at 75 PSI, that it's when the problems start. I've altered the range & it seems much better, should of checked that first!
    New compressor required I think..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cincinatti Arrow 500 spindle clamp speed

Cincinatti Arrow 500 spindle clamp speed