Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"


Results 1 to 1 of 1

Thread: Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"

  1. #1

    Default Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"

    I have Arrow with Siemens Control. In the rack, I have DV5 servo board and Profibus DP Card. RT board is G7VP2. I lost bios settings after replace BIOS battery. When I set two interrupts IRQ7 and IRQ15 to ISA in the RT BIOS menu, the machine is undergoing diagnostics. All tests is passed but I have error "alarm 40-33 output/fuse failure on APC rack 0". Has anyone solved this problem? Does anyone have Flash and BIOS settings for RT G7VP2?

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    United States
    Posts
    283
    Downloads
    0
    Uploads
    0

    Default Re: Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"

    Serwis we reflash these using a binary program and floppy disk; then test the board in a simulator with a special I/O Board tester. The pn on the inside lip of the RTCPU board chassis is 3-424-xxxxAyy. This is what someone would need to know to perform the settings.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"

Arrow Siemens "alarm 40-33 output/fuse failure on APC rack 0"