[QUOTE=greg b;2440190]Hi all has any body got the information on removing the tool change ejector shaft from the spindel housing we have got the tools to do the job but our manuals don't cover this part they only have the schematics which are drawings 1263168,and 61262073 so the procedure on removal would be great if any body should have it.[/QUOTE
Hi does anybody know how high the draw bar end with the 2 flats on it should protrude out the top of the spring pack of the tool change ejector,or if there is a torque setting on the spring pack.I know what the shiming height should be for the pneumatic ram but I figured there should be a height or torque setting for the spring pack on the tool injector thanks for any help.