Need Help! Talon 210, wireing issue


Results 1 to 3 of 3

Thread: Talon 210, wireing issue

  1. #1
    Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    118
    Downloads
    0
    Uploads
    0

    Default Talon 210, wireing issue

    Hi, My Talon 210 Lathe is giving me a turret OL error and I can reset it with reset button while running, but error appears only at a certain Z position, if I move Z axis of this position error will not come back on until back at this same position... figure broken wire in back , but do not have the wire diagrams...

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    United States
    Posts
    285
    Downloads
    0
    Uploads
    0

    Default Re: Talon 210, wireing issue

    Fives-MSI (Cincinnati) sells the Diagrams Stamped on the Serial Plate to you by email...



  3. #3
    Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    118
    Downloads
    0
    Uploads
    0

    Default Re: Talon 210, wireing issue

    issue is fixed..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Talon 210, wireing issue

Talon 210, wireing issue