- question about vickers card on cincinnati arrow 1000, APS7500
-
Member
question about vickers card on cincinnati arrow 1000, APS7500
Hi, i leikt to know if nay boday have user/service manual for and arrow 1000 cneter machine, or manual for servo and poser supply pack:
X axis is an AS10300
Y axis is an AS10302
Z axis is an AS10301
A axis is an AS06300
Spindle is an AV2400
PS is an APS7500
any manual can help me.
thanks
Similar Threads:
-
-
Member
Re: question about vickers card on cincinnati arrow 1000, APS7500
-
Member
Re: question about vickers card on cincinnati arrow 1000, APS7500
Originally Posted by
machinehop5
Thanks but i already find thsi manual and it cann't help me, i need service manual to know wiring Diagram, drive/power suplly pin out. i try to retrofit an Arrow 1000 to use it with mach3
-
Member
Re: question about vickers card on cincinnati arrow 1000, APS7500
arachid, On the serial plate on the back of the electrical cabinet door are 3-Important pieces of information:
Machine Serial Number: 7049A0xyyzzzz
Model Type (USA): Exx i.e. ERM (Mechanical design England-1997)
Rest of the world had a separate plate with the YEAR i.e. "1997"
Control Diagrams: 9120xxxxy i.e. 91203813B might be for the Dart-Arrow Fusion-2 Solid State Drives (Digital)
The Control Diagrams: 9120xxxxy were what your machine was wired to. Fives-Cincinnati-Parts sells them for $200 as a PDF. This is what you need! 1-859-534-4750 (Cincinnati-Parts)
-
Member
Re: question about vickers card on cincinnati arrow 1000, APS7500
The Control Diagrams: 91203813
-
Member
Re: question about vickers card on cincinnati arrow 1000, APS7500
I have wondered about this too. Have you had any progress?
-
Member
Re: question about vickers card on cincinnati arrow 1000, APS7500
email me and I will respond with all drive and spindle manuals. mike@KilroyWasHere.com
- question about vickers card on cincinnati arrow 1000, APS7500
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules