Acramatic 2100 on a Cincinnati CNC. Spindle Motor won't start

[djmachineshop]

On Startup, machine goes to Home position but Spindle motor will not complete itself to have machine ready to run. Does anyone have an electrical schematic for this machine or suggestions for fixing this problem? Thanks.

Similar Threads:

• Need Help!- SOFTWARE CINCINNATI ACRAMATIC 2100
• Need Help!- Cincinnati Arrow: 39-81 "spindle drive is not responding" acramatic 2100
• Need Help!- cincinnati milacron 1000 acramatic 2100 NEED HELP WITH BIOS TO START PLEASE
• Cincinnati Acramatic 2100 (Vickers)
• Need Help!- Cincinnati Milacron Acramatic 2100 computer don't start

[tspiszak]

https://www.dropbox.com/sh/y38l30x7n...GNxPMKJya?dl=0


Sent from my D5803 using Tapatalk

[meckardt55]

Does the spindle turn but it can't find the home position? Did you change any parameters in the control or the spindle drive? Do you have the black colored Kollmorgan spindle drive or something else (servo star ) ? Do you have an error code on the control or the spindle drive, if so what does it say??

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services