- Need Help!- Any one who can help me with an issue, ALARM 39-75 in a Arrow 1000 A2100
-
Member
Any one who can help me with an issue, ALARM 39-75 in a Arrow 1000 A2100
Hi guys!! i'm in a trouble, i was fixing a Cincinnati CNC machine but when i want to set home position i have an alarm in the screen, i was searching in the internet the code of the alarm but i wasn't so lucky.
ALARM 39-75
"Machine Power is OFF"
Cause: Cycle Start, Axes Alignment, powerfeed and handwheel operations are not permited while machine power is off.
Severity 80: Still in cycle
Similar Threads:
-
-
Member
Re: Any one who can help me with an issue, ALARM 39-75 in a Arrow 1000 A2100
You should look at the electrical prints for the input "machine power on " from a relay. I think you may have a bad relay contact, replace that relay.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
- Need Help!- Any one who can help me with an issue, ALARM 39-75 in a Arrow 1000 A2100
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules