Cincinnati milling machine

[ashrafhosni]

I have a problem in my Cincinnati milling machine
That after it works
It gave me "power supply fault"
And machine is stopped

Similar Threads:

• Newbie- Cincinnati milacron arrow 750 milling machine
• cincinnati arrow 500 machine power on issues
• Haas Toolroom mill CNC Milling machine TM-2 TM2 Milling station Front cover
• Haas Toolroom mill CNC Milling machine TM-2 TM2 Milling station Front cover
• ANTIQUE Cincinnati hyspeed tapping machine #28

[tspiszak]

Check if you have around 310V from power supply psr4, I assume you have kollmorgen drive.

Sent from my D5803 using Tapatalk

[meckardt55]

You have a bad control power supply if you have a 2100 control. The problem is not in the PSR4 of your drives.

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

[ashrafhosni]

thanks for your reply
i will check and update you soon

[ashrafhosni]

thanks for your reply
could you explain to me more about
bad control power supply
wait your reply