error

[jarl85]

can someone assist me with this error






thanks Karl

Similar Threads:

• Need Help!- Has anyone ran into this error? Parasolid ® Kernel Interface Error: KI Error Code:58
• Need Help!- Fixed BMDC Error, now have overactive feed error. Help needed.
• New Machine Build- Strange error in machine defintion manager (Error occoured in IOF chook: )
• Cincinnati Sabre 750 850SX spindle error 16541 Fanuc error AL 12
• Yaskawa Servopack error: A.D1. Motor Load Position Excess Error

[maver1ck]

Means the axis was out of position, either moved further than expected (i.e. runaway axis) or didn't move as far as expected (i.e. motor power cable is disconnected).

These are the two extremes, yours is likely somewhere in the middle but without detailed information, can't be specific. There are many potential causes for either.

[meckardt55]

With the machine off you need to remove the left hand X axis way cover and look at the motor electrical connections and turn the ballscrew to make sure it turns easy
It help if you gave us more info on the problem along with the type of machine and drives. Do you have scales??

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

[jarl85]

thanks for the help

one of the bearings went bad and í change it, and all is good now

Karl