https://www.dropbox.com/sh/2jo...AAC...Kk9QpNKIa?dl=0
Sent from my D5803 using Tapatalk
Good Morning,
I have a older vintage Cincinnati arrow 500 with the A2100 control. The machine wont boot up any more and we have determined that the work station boards Dallas chips battery has finally died. We have bypassed it with an external battery pack. And we are now trying to reset the BIOS to the factory setting so it will boot properly. If any one would be able to share a photo of the settings I would greatly appreciate it!
Part # 3-424-2123A REV: A
Similar Threads:
https://www.dropbox.com/sh/2jo...AAC...Kk9QpNKIa?dl=0
Sent from my D5803 using Tapatalk
If you still need the config for your WS board send me a PM with an email address and I'll send you the configuration.
https://www.dropbox.com/sh/531lvwcl5...WjplEM1Wa?dl=0
Sent from my D5803 using Tapatalk
Sorry for the delay but for some reason account had to be reverified before it would let me do anything, but they didn't inform me of that so I was locked out for weeks trying to get it sorted.
PMs should be working again