Acramatic 2100 shut down procedure


Results 1 to 2 of 2

Thread: Acramatic 2100 shut down procedure

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Acramatic 2100 shut down procedure

    Hi everyone,
    I am working on A 2100 control for a friend and have the chassis out of the machine. I have boot windows to see if the machine passes diagnostic and now want to shut down the control. Is there a Keyboard command to shut down windows. Or a way to get to the start menu and select shut down?

    Thank you for the help!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2006
    Location
    usa
    Posts
    473
    Downloads
    0
    Uploads
    0

    Default Re: Acramatic 2100 shut down procedure

    It depends how you have it set up. Control,alt and delete if you are in windows only, master stop input if you have the I/O hooked up. You could also shell out to DOS and shut it down.

    MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services



  3. #3
    Registered
    Join Date
    Mar 2008
    Location
    United States
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default

    The answer is only a phone call away....

    Fives Cincinnati Technical Support is 1-859-534-4750 We are the same group that has supported this product in the US and were formerly Mag-Cincinnati; Unova-Cincinnati; Cincinnati Machine; and Cincinnati Milacron.
    Hours 8am-5pm EST (Lunch Noon-1pm EST)
    Best Regards,
    Greg Wood



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Acramatic 2100 shut down procedure

Acramatic 2100 shut down procedure