- Acramatic 2100 shut down procedure
-
Member
Acramatic 2100 shut down procedure
Hi everyone,
I am working on A 2100 control for a friend and have the chassis out of the machine. I have boot windows to see if the machine passes diagnostic and now want to shut down the control. Is there a Keyboard command to shut down windows. Or a way to get to the start menu and select shut down?
Thank you for the help!
Similar Threads:
-
-
Member
Re: Acramatic 2100 shut down procedure
It depends how you have it set up. Control,alt and delete if you are in windows only, master stop input if you have the I/O hooked up. You could also shell out to DOS and shut it down.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
-
Member
The answer is only a phone call away....
Fives Cincinnati Technical Support is 1-859-534-4750 We are the same group that has supported this product in the US and were formerly Mag-Cincinnati; Unova-Cincinnati; Cincinnati Machine; and Cincinnati Milacron.
Hours 8am-5pm EST (Lunch Noon-1pm EST)
Best Regards,
Greg Wood
- Acramatic 2100 shut down procedure
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules