- Cincinnati Sabre 1000 HH 415 ERROR when start pump
-
Member
Cincinnati Sabre 1000 HH 415 ERROR when start pump
Hello guys,
I have a problem with my machine. When program (spindle, axis and water pump) started or turn off, machine sometimes showing a Gross positioning error... Sometimes when spindle rotate and I hand turn on pump is the same problem. I know what mean Gross positionig error, but now it is not relate with loose in machine. It look like the voltage dropped... I change contactor from pump and nothing better. I do not know where I should looking problem.
Similar Threads:
-
-
Member
Re: Cincinnati Sabre 1000 HH 415 ERROR when start pump
WHAT IS YOUR INCOMING VOLTAGE, Are you running this machine on a phase converter or industrial 3 phase? It sounds like it is related to a voltage drop. What control and drives do you have on this machine?
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
-
Member
Re: Cincinnati Sabre 1000 HH 415 ERROR when start pump
It is HH 415 BR. Drives FANUC. Sometimes, but very rarely on PCB show LV LED. Machine is connect to 3phase. I have 3 other machine which working fine.
- Cincinnati Sabre 1000 HH 415 ERROR when start pump
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules