Good afternoon, I need a help, I have a CNC sabre 1000, acramatic 2100 command, it's an old CNC and I do not find much information on the network, there was a problem, it corrupted the HD image of the machine, I would like to see if someone has a image or if it could give some support!!
Similar Threads:
You need to get an updated solid state drive software from FIVES Machine Company 800-934-0735. Then you need to have someone that knows what they are doing, install it and set it up for your machine.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
If I am not mistaken, the drives FIVES Machine sells are SSD. I had them on the phone the other day and asked if he had ever done an SSD swap and if it was difficult. He said theres no need as the replacement drives they sell are now SSD anyways.
@Anderson0218
Hello, sometimes it's possible to make your existing hard drive work. you must give more information or PM me.