monitor help...


Results 1 to 3 of 3

Thread: monitor help...

  1. #1
    Registered
    Join Date
    Oct 2011
    Location
    Canada
    Posts
    135
    Downloads
    0
    Uploads
    0

    Default monitor help...

    Hey guys, looking like I came across a dead monitor in an Arrow2. It doesn't have the normal vga style connection. Is there some sort of adapter I can use to hook up a normal monitor?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2011
    Location
    USA
    Posts
    257
    Downloads
    0
    Uploads
    0

    Default

    What WS board do you have? Some of them have a VGA port on the board and use a video card for the signal to the operator station (they were all pre series 2 machines though unless someone has swapped it out). If you do have one of these, you can get a VGA display directly from the WS board, but depending n where the issue is, may lose the rest of the op station functionality.

    The connector you mentioned does not use a standard VGA signal, and unlike VGA, that connector also provides power and data for the op station.

    What is it doing (or not doing) that you decided it is the display? I have seen the backlight fail on some of these LCD monitors but the rest of the op station is still functioning. I have also seen the WS board (or video card) cause the display to not work as well.



  3. #3
    Registered
    Join Date
    Oct 2011
    Location
    Canada
    Posts
    135
    Downloads
    0
    Uploads
    0

    Default Re: monitor help...

    Could possibly be the back-light that has failed, but Ive got it sorted out for now.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

monitor help...

monitor help...