Reply with QuoteNot sure what you mean by " it's fine and doesn't move" , does it do a normal tool change?? Does it happen on just one tool or any tool?
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
Auto tool change position
Hi guys,
I have an Arrow 500 (Acramatic 2100) which crashed today. It looks like all the offset info has been lost.
I have everything set back as best I can but now when there is a tool change in a program the machine rapids to a tool change position that is near to machine datum zero.
If I 'data reset' before the tool change & start the program from the next tool change then it is fine & doesn't move.
I've looked for a tool change position setting but can't find one.
Any body help?
Many thanks.
Similar Threads:
- Need Help!- Park & tool change position after tool probe.
- Need Help!- Fanuc 0i-MC How to force waiting tool pot move to tool change position
- Brand New 5' x 10' CNC Router with 8 position rotary Auto Tool Changer - No Longer Available
- How to change Tool change position(About MAZATROL T1 control)
- Auto Tool Zero Sensor & Connection Checker, Cnc, Tool Change / Measurement.
Re: Auto tool change position
Not sure what you mean by " it's fine and doesn't move" , does it do a normal tool change?? Does it happen on just one tool or any tool?
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
Re: Auto tool change position
Hi Mike,Originally Posted by meckardt55
By its fine I mean it doesn't move in the x & y. It happens to any tool change in a program. MDI tool changes are ok.
Sent from my SM-N950F using Tapatalk
Re: Auto tool change position
Do you have a M26 P4 in the program??
Mike CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
Re: Auto tool change position
No, I'm using new and old programs that never used to have this issue either.
Is there a default tool change position in x & y at I can change? I thought I read something about a value that if it was negative then it wouldn't move the x & y?
Sent from my SM-N950F using Tapatalk
Re: Auto tool change position
Any help, much appreciated!!!
Re: Auto tool change position
It sounds like you've lost the G28 P4 position
There is a section in the acramatic control showing you how to reset it
Try looking at section 4 page 64
Any problems inbox me
