- Need Help!- A2100 gcode
-
Member
A2100 gcode
I just bought an arrow 500 and I’m just trying to figure out this control. I went to run a test program that was a dynamic tool path and it had incremental ijk in it. The control gave me an end of arc out of tolerance. I changed the outputs to radius and it worked fine. Is this control capabile of inc. ijk or do I stick to radius.
Sent from my iPhone using Tapatalk
Similar Threads:
-
-
Member
Re: A2100 gcode
The control looks for a true circle within 0.001" when using IJK in a G02 or G03. You can open the window press MORE, CONFIG, PROGRAMMING, and at the top bar I think it is under circular and open the value in the box.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
- Need Help!- A2100 gcode
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules