Sabre 750 Acramatic 850sx Start Up


Results 1 to 4 of 4

Thread: Sabre 750 Acramatic 850sx Start Up

  1. #1
    Registered
    Join Date
    Oct 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Sabre 750 Acramatic 850sx Start Up

    Hello,

    I am working with a Sabre 750 that booted up correctly at the shop I bought it from. Now that I have it wired here at home, I am having issues. It gets to the system startup page and all of the inputs pass. Then, it flashes "host control initializing" and doesn't go any farther. Does anyone have experience with this issue? I appreciate any help I can get.

    Thanks,

    Jeston

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2012
    Location
    Canada
    Posts
    143
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by sheldo13 View Post
    Hello,

    I am working with a Sabre 750 that booted up correctly at the shop I bought it from. Now that I have it wired here at home, I am having issues. It gets to the system startup page and all of the inputs pass. Then, it flashes "host control initializing" and doesn't go any farther. Does anyone have experience with this issue? I appreciate any help I can get.

    Thanks,

    Jeston
    Wow I mean wow same thing here on a avenger 250t we changed out the keyboard because of a hard to press m key to find this problem only the power button works.

    Attached Thumbnails Attached Thumbnails Sabre 750 Acramatic 850sx Start Up-imag0810-jpg  


  3. #3
    Registered
    Join Date
    Jul 2009
    Location
    turkey
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Hi
    I'm having the same problem. please help me.

    I am having trouble for turning the cincinnati Acramatic 850sx control panel.
    my motor drive is siemens.
    SUMP off
    DIMP off
    GMEM red
    DAMP red
    RUN yellow
    OSA red
    MMC red
    SERV off
    PCA red
    DPWR green
    APWR green

    Display SYSTEM START-UP HOST CONTROL INITIALIZING
    then there is no movement. waiting for help for this problem. thank you.Attachment 433451Attachment 433453



  4. #4
    Member mchurley37's Avatar
    Join Date
    Dec 2021
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Sabre 750 Acramatic 850sx Start Up

    what is the answer



  5. #5
    Member
    Join Date
    Mar 2008
    Location
    United States
    Posts
    122
    Downloads
    0
    Uploads
    0

    Default Re: Sabre 750 Acramatic 850sx Start Up

    You can contact Cincinnati Tech Support at Fives-MSI with your Machine and control serial numbers.
    It appears that while the machine was shut down the SRAM Battery on the MMC board has died.
    You've lost the Machine Application Software (PMC, PLC), I-Sub & G-Sub Routines, Part Programs, Tool Data, Offsets, SYS COMM (System Parameters), MTB COMM (Machine Tool Builder Parameters), Servo Parameters, RS232 Device Parameters.
    To get the Board repaired we would need the MMC Card Part number listed in the "Blue" Configuration Manual (three ring plastic binder) with Board Part numbers;
    Software Loaded, Options Enabled, SYS COMM & MTB COMM Parameter listing and Servo Parameters and Device Parameters.
    Without the "Blue" Configuration Manual (three ring plastic binder) you may have a major problem...



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sabre 750 Acramatic 850sx Start Up

Sabre 750 Acramatic 850sx Start Up

Sabre 750 Acramatic 850sx Start Up