VFS5 Kollmorgen drive

[juniormachinist]

Im looking for Motion Link software to communicate with a VFS5 Kollmorgen drive does anyone have a link thanks

Similar Threads:

• Need Help!- VFS5 BDS5 BDS4 PSR4 Kollmorgen Spindle Drive Unit Cincinnati Milacron Arrow
• Need Help!- Hawk150 VFS5 Spindle Drive Fault
• VFS5 Drive problems - Switch to Vickers Vector drive?
• Need Help!- Kollmorgen Drive Repair
• VFS5 spindle drive

[meckardt55]

Contact Mike Kilroy at kilroywashere .com They are the Kollmorgan service company 937-660-5313 in the USA

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

[mike_Kilroy]

here is link to the vfs5 manuals:

https://app.box.com/s/osd5j1nrus3ob1vdz2jx

and

https://app.box.com/s/uvzqestj2ui7e5nhd8o4

Here is link to the software to talk to it:

http://www.kollmorgen.com/zu-za/prod...ssioning_rev1/


you use std rs232 cable with ONLY 3 WIRES: db9 both ends, pin 3 to 2, 2 to 3, 5 to 5.

[juniormachinist]

Thanks Mike

[lubo]

Hi Mike, I need VFS5 manual.
Can you help me?

[mike_Kilroy]

Hi Mike, I need VFS5 manual.
Can you help me?

Sure, PM or post your email address and I will send you links.

[lubo]

Thanks Mike . please send it to lubominev@gmail.com

[precisionatl]

Hi Mike, I am also looking for the VFS5 Manual. Could you please send it to me? Jaysmachining@yahoo.com

[mike_Kilroy]

Hi Mike, I am also looking for the VFS5 Manual. Could you please send it to me? Jaysmachining@yahoo.com

done

[MichiganTech810]

Mike, could I please also trouble you for the VFS5 manuals. aharrington@yorkrepair.com . Thank you for any help you may be able to provide. Also, do you have a new link to get the software by chance. The above links weren't able to be found.

[VMG24]

Sure, PM or post your email address and I will send you links.

Mike could you please send me a copy of the manual for the vfs5. Thanks Vince@solenbergperf.com

[mike_Kilroy]

Mike could you please send me a copy of the manual for the vfs5. Thanks Vince@solenbergperf.com

Sure, when I get back to town tomorrow.

Sent from my SM-G900V using Tapatalk

[Dreyy]

Hello, Mike
Need your assistance with VFS5 drive on Cincinatti Milacron Arrow 1000 (750).
As a result that BRAm Dallas hasn`t been changing for almost 25 years,
the settings that were in it have gone astray.
It looks like this: after turning on the machine, on VFS drive LED behave like this:
- Active: not illuminated
- System Ok: illuminated
- CPU: blinking
- Fault: not illuminated
- Relay: not illuminated

After connecting VFS5 to MotionLink we saw errors 80, 83, 84. In TL-file we saw that engine parameters are wrong.
After this connection VFS5 Spindle drive LED`s are:
- Active: off
- System Ok: on
- CPU: on
- Fault: off
- Relay: on

At the same time, the movement along the axes began to work, but the spindle does not rotate.
MotionLink continue to write errors 80, 83, 84.

BRAM was replaced.
Since we do not have files with parameters, please help remotely with the solution of this problem
on our machines Cincinatti Milacron Arrow 1000 and 750.

The problem is similar to the one discussed on this forum, but we can not solve it ourselves: https://www.cnczone.com/forums/cinci...are-forum.html