What's the chance you could do the same on an Acramatic 950MC? I believe the 850 is actually newer than a 950 if that's any help.
Jay
Hello,
If anyone is interested in turning on options in the 850SX, here is some info.
There may be a different way to do it but I come from a hardware background so I dig into hardware instead of software.
I read the eeproms on the memory card and have located the option bits, reprogrammed and reinstalled the eeprom (in a socket) and it all works fine.
I will not post too much in case no one cares!
These controls are old and all but impossible to get support from the maker. Otherwise I would suggest going through proper channels for option upgrades.
Similar Threads:
What's the chance you could do the same on an Acramatic 950MC? I believe the 850 is actually newer than a 950 if that's any help.
Jay
Parts and repair is available on some of the Acramatic control series from Siemens who owns the product. Siemens can be contacted at 800-879-8079. It is true what peterson76 says in that these controls are old and access to components to repair is limited. If the iron is still good, a retrofit is an option which Siemens can help with. When calling the 800# the customer support reps can forward your information to someone to follow up on discussing the retrofit options.
Sent from my iPad using Tapatalk
Hi, im very interested in what your doing i need some upgrades on my 850sx its on a horizontal mill how can i get ahold of you or you can email me at:
miran86@exede.net
Hi
I am having trouble for turning the cincinnati Acramatic 850sx control panel.
my motor drive is siemens.
SUMP off
DIMP off
GMEM red
DAMP red
RUN yellow
OSA red
MMC red
SERV off
PCA red
DPWR green
APWR green
Display SYSTEM START-UP HOST CONTROL INITIALIZING
then there is no movement. waiting for help for this problem. thank you.Attachment 433443Attachment 433445
This is a super old thread but if this is possible who knows how to do it and can you explain a little more detail? Thanks
You need to get the control reference manual that shows how to trouble shoot using the lights.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services