- A2100 Realtime fail
-
Registered
A2100 Realtime fail
This control is only a year old give or take a month or two. Diagnostics claims the realtime processor has failed on startup but when you look at the leds on the BBB
there are not any red leds to indicate failure. Has anyone heard of this one?
Thanks in advance for your help.
Scott
Similar Threads:
Last edited by slowlearner; 10-11-2012 at 02:07 PM.
Reason: changed term
-
-
Member
Have you checked the batteries on your WS and RT boards? I have seen a large number of A2100 controls from the mid to late 90's with dead batteries in the last year, so it is worth looking at on your machine.
If you decide to test the batteries, do not remove the batteries while checking them. If the batteries are still good and you remove them from the board, this will cause the BIOS to reset and you will have multiple issues to fix.
-
Registered
doesnt make sense
I changed out my X axis servo and I nolonger get any errors.
How is this possible?
-
Member
good gosh!
what made you change out a drive for THAT fault? divine intervention??? WOW!
You are amazing Scott!
-
Registered
Mike I think you are correct. BTW I do have a couple Goldlines to send you pretty soon. I got another one about to go down.
Take care,
Scott
-
Member
Re: A2100 Realtime fail
Hi Mav. Can you call message me your phone number? I need your help. Thx
- A2100 Realtime fail
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules