machine opinions


Results 1 to 2 of 2

Thread: machine opinions

  1. #1
    Registered
    Join Date
    May 2012
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default machine opinions

    What do you guys think of your Cincinati Machines? were looking at one one for sale its a cinturn 300t - 1000 with the acromatic 850 control.. Im trying to find a review from someone online but all my searches just end up with machines for sale or being auctioned off.. most of our machines are older mori seiki with fanuc controls. ive read that this control on the cinturn uses just g codes which is ok because that's how we program with our current ones..but some people on other forums say there is slight differences.. i looked at the program manual yesterday it it appears to be the same type of programs that we use. does anyone have any experience with this machine or just something similar.. ive asked other shops we work with if they've had any experience with them and no one has. so im reaching out to you guys to let me know what you thik.. how hard are parts to find? they they break down alot? just any thing you can share would be of help.. thank you

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2009
    Location
    usa
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default

    I have two cinturn 300t turning centers with the Acramatic 850sx and I love them mine has been super reliable and are very heavy duty and accurate and produces a nice cut as far as part availability I really have not needed to purchase anything but most are available on the internet like every thing good luck and if I can help in any way just ask QUOTE=The Furian;1114809]What do you guys think of your Cincinati Machines? were looking at one one for sale its a cinturn 300t - 1000 with the acromatic 850 control.. Im trying to find a review from someone online but all my searches just end up with machines for sale or being auctioned off.. most of our machines are older mori seiki with fanuc controls. ive read that this control on the cinturn uses just g codes which is ok because that's how we program with our current ones..but some people on other forums say there is slight differences.. i looked at the program manual yesterday it it appears to be the same type of programs that we use. does anyone have any experience with this machine or just something similar.. ive asked other shops we work with if they've had any experience with them and no one has. so im reaching out to you guys to let me know what you thik.. how hard are parts to find? they they break down alot? just any thing you can share would be of help.. thank you[/QUOTE]



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

machine opinions

machine opinions