SPINDLE ERR 18 BAT TL


Results 1 to 4 of 4

Thread: SPINDLE ERR 18 BAT TL

  1. #1
    Registered
    Join Date
    Apr 2010
    Location
    MEXICO
    Posts
    1
    Downloads
    0
    Uploads
    0

    Post SPINDLE ERR 18 BAT TL

    Hi

    We have a VICKERS DRIVER MODEL VFS5-275-00-2606/A with a compensation module 275/2604A-010.
    We connect the MOTION LINK PLUS SOFTWARE and appears the ERR 18 BAT TL FILE
    The VFS5 has two boards: MC board and IBD board the two cards are the same that we are using before.
    We have the TL VFS5 v 1.03cC file and we compare this with the system in and are the same.
    We have the encrypted Key number 1991923109, but we dont have the unlocked number to transfer again the TL file and Variables, Do you know how to correct this, please inform us.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2008
    Location
    uk
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default

    hello what machine ( what control is on it ) is this for?
    what is the encrypted number for?
    regards
    mallardfizz



  3. #3
    Registered
    Join Date
    Aug 2008
    Location
    UNITED STATES
    Posts
    97
    Downloads
    0
    Uploads
    0

    Default

    not familar with some of what you are saying but is this where you would go to ml terminal with motion link plus and type new then if on a2100 type a2100 and then it will let you save variables to drive. But also cincinatti only changes a few of the user variables and some you can not change. Also i don't have a vfs5 manual here with me but there is a battery in the vfs5 and i'm not sure which board it is on but where your alarm reads bat tl i would check my manual to see if there is battery that is dead. I may be way off but trying to help so sorry if i miss inform. I will check your alarm in manual tommorow when at shop and see if i can offer more help.



  4. #4
    Member val62's Avatar
    Join Date
    Nov 2021
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: SPINDLE ERR 18 BAT TL

    I have exactly the same error!
    What else to try...
    Or just send it in for repair!
    valery62@ukr.net



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SPINDLE ERR 18 BAT TL

SPINDLE ERR 18 BAT TL