you need to change your calibrator's polarity. I guess your calibrator's signal is on, that's why when you press measure and machine goes up.
Helo
I have been working with my cnc omi sytec 6mb for a while and everything was ok.but now when it want to mesure the tool on the tool measurement tip My milling machine just goes up ant stops becouse it reaches maximum z axis.So maby someone had a similiar problem when insted of going down to measurre the tool my machine goes up?
Similar Threads:
you need to change your calibrator's polarity. I guess your calibrator's signal is on, that's why when you press measure and machine goes up.