- presette Precitool
-
Registered
Hello guys
We are looking for a pre-setting device for milling tools.
Has anybody got experience with devices from the firm Precitool?
Many thanks for your answers
Best wishes
-
-
We have a Preciset 400 with the ImageController2 for 1 year now.
Its not bad – however you need to know where the device has its limits.
Its enough for us but if you want to measure µ, you better off looking at devices from Zoller.
I got told that exact sentence on a fair by a Precitoolmitarbeiter employee.
Accuracy with Preci is at 1-2 hundredth- that gives reason for the release.
But it was immediately deliverable and well priced.
I want to add that the devices actually come from Zoller- however they don’t resolve so well and that the software doesn’t come close to the one from Zoller.
There are other well knows manufacturer with reasonable prices- that’s for sure.
Regards
-
Hello
Look at Kelch Presetter. The produce in Germany and have a very good Presetters.
-
- presette Precitool
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules