SPC control

Results 1 to 5 of 5

Thread: SPC control

  1. #1
    Registered Lutz25's Avatar
    Join Date
    Jan 2007
    Location
    Kelkheim
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Who knows a good spc program that isn’t too expensive but is easy in use? I would be glad to hear from you.



  2. #2
    InTex's Avatar
    Join Date
    Feb 2007
    Location
    Schladen / Harz
    Posts
    4205
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Who knows a good spc program that isn’t too expensive but is easy in use? I would be glad to hear from you.
    Hello

    What do you mean with not expensive? 500€?

    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />


  3. #3
    Registered bullet01's Avatar
    Join Date
    May 2009
    Location
    Buchstehude
    Posts
    1352
    Downloads
    0
    Uploads
    0

    Default

    There’s freeware here.
    It’s an old but free one.

    push me



  4. #4
    Registered Lutz25's Avatar
    Join Date
    Jan 2007
    Location
    Kelkheim
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    Hello

    What do you mean with not expensive? 500€?




  5. #5
    Registered Lutz25's Avatar
    Join Date
    Jan 2007
    Location
    Kelkheim
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    It shouldn’t cost 250000 but 10000 is ok.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SPC control

SPC control