Prt-e1500w does not reset


Results 1 to 2 of 2

Thread: Prt-e1500w does not reset

  1. #1
    Member woodcnc80's Avatar
    Join Date
    Nov 2022
    Posts
    2
    Downloads
    0
    Uploads
    0

    Unhappy Prt-e1500w does not reset

    Hello everyone,
    following a reset with D176 command, when I restart the CNC it appears as per the attached picture, do you know a way to reset the board?
    The only thing that does not work is the spindle, otherwise the cnc works fine.
    Thank you very much

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Prt-e1500w does not reset-prt-e1500w-jpg  


  2. #2
    Member
    Join Date
    Jun 2005
    Location
    USA
    Posts
    1593
    Downloads
    0
    Uploads
    0

    Default Re: Prt-e1500w does not reset

    The photo shows you have the machine in manual mode. What happens when you press the RUN button? You did not explain exactly what is happening.



  3. #3
    Member woodcnc80's Avatar
    Join Date
    Nov 2022
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Prt-e1500w does not reset

    Hello, do not turn the spindle, neither in manual mode, nor in pc, nor using pc and controlled by pc, everything worked before. After the D176 command it is as if it went into protection



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Prt-e1500w does not reset

Prt-e1500w does not reset