Prt-e1500w does not reset

[woodcnc80]

Hello everyone,
following a reset with D176 command, when I restart the CNC it appears as per the attached picture, do you know a way to reset the board?
The only thing that does not work is the spindle, otherwise the cnc works fine.
Thank you very much

Similar Threads:

• Need Help!- 6040 cnc PRT-E1500W vfd settings.
• Need Help!- Replace Internal PRT-E1500W With External - Can It Be Done?
• PRT-E1500W Controller issues
• Problem- 6040 cnc PRT-E1500W vfd problem
• CNC controller PRT-E1500W problems

[CNCMAN172]

The photo shows you have the machine in manual mode. What happens when you press the RUN button? You did not explain exactly what is happening.

[woodcnc80]

Hello, do not turn the spindle, neither in manual mode, nor in pc, nor using pc and controlled by pc, everything worked before. After the D176 command it is as if it went into protection